20 Door Handle Replacement Websites Taking The Internet By Storm

20 Door Handle Replacement Websites Taking The Internet By Storm

Door Handle Replacement

It's worth it to replace door handles if you aren't happy with the way they appear, or if they are difficult to use. Installing a new door handle is simple if you have patience.

The majority of modern door handles come with cover plates that conceal the screws for an attractive appearance. However, you will need to attach them separately if your new handle does not have them attached already.

Remove the old handle

The door handle isn't only a decoration for your home it also serves as an element of security that allows you to lock and unlock the door. Over time, the door handle may become loose or feel a bit loose. It might be beginning to appear old and worn. This is an indication that it's the time to replace your door handle.

One of the first indications that your door handle requires replacing is the fact that it is becoming difficult to operate. This is a serious issue as you will no longer be able to lock or unlock the door and put you and your family at risk.

Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle can be quite dangerous, especially when your children or elderly family members are unable to open it and end up trapped within. Luckily, it's quite simple to fix a damaged door handle by simply replacing the old one.

The majority of modern door handles are standard size, so they are suitable for any door. If you're not certain if your new door handle will work, remove the old one and measure the holes in its housing. This will help you to buy the correct sized door handle.

The easiest method to take off the handle from your door is to take it off of the door itself. This is typically done with a screw driver. However certain door handles come with a cover plate that conceals the mounting screws so you'll have to cut off this cover plate to get access to the screws underneath. Once you have removed the old handle, make note of the way the spindle is attached to ensure that you can be sure to align it when you install your new one.

Alternatively, you can remove the door handle by uncrewing it from the latch mechanism. This is typically done with an screwdriver however you'll need to locate the small latch, which should be just to the left of the trim piece. After you have removed the latch, take off the handle and strike plate. Then, remove the latch from the edge of the door.

Removing the Strike Plate

You'll need to replace the latch plate after replacing the handle. It's the part that is the one that holds the hole in which the door's latch hooks in when the door closes. The new handles will have two latch plates: a rectangular and circular plate (see the diagram above that shows the parts of the door handle). If you have an rectangular latch plate, swap it with a circular one. This will allow the latch to be able to hook into the strike plate and make the handle easier.

The first step is to remove the screw holding the latch plate. The screws are usually quite tight and require a lot of force to loosen them. If possible, it may be helpful to have another person help with this process.

After the screws have been removed, the latch plate will slide out of the door with ease. If the latch plate is stuck or refuses to move use a small file to scrape the edges. This will sometimes free the plate up.

Now you can prepare the new strike plate for installation. With  Suggested Looking at  made of wood that came with the new handles, attach the latch plate to the inside of the doorjamb. Be cautious not to tighten too much the screws, as this may damage the strike plate.

If you're not sure whether the latch plate is in the proper position Try closing and opening the door to check if it closes and latches correctly. If not you'll have to adjust the strikeplate up or down, or forward or back until the door shuts correctly.

If the door is still moving or jiggles, you might have to enlarge your latch hole on the strike plate. This is more common in older doors, however it could be due to wear and tear hinge mortises that are too shallow or not the right size for the latch, or because of damaged or broken strike plate. If this is the situation then you should use a filing made of metal instead of a chisel, or hammer to adjust the strike plate.

Take off the Latch

The latch is an angled metal piece that slides into and out of a hole on the inside of your door. When you turn the handle, it pushes this latch forward which allows you to open the door. It also connects to an opening in the frame of the door to keep the door shut. If your door wobbles when you close it, an upgrade to the latch could be the only thing needed to fix the issue.

It's hard to see the screws that hold the latch to the door, however there's usually a small hole on the trim plate that lets you to insert a screwdriver and take it off. After you've removed the trim plate, it'll be easy to remove the latch as well as the bolts that keep the spindle and latch in the position.

If the latch won't release, try using a paper clip or a tool to release it from the handle mechanism. Insert the item in the slot for the latch that is recessed, and gently twist it or jiggle until you feel that the latch and handle begin to split. It is possible repeat this process a few times before you can take the latch off.

Once the old latch is removed it should be possible to move the new latch into the slot without problems. Use the new screws to connect the latch to the strike plate or door frame. Make sure it is correctly placed in the slot, aligned with the screw chambers.

Measure the existing backset (the distance between the centre of the large hole on the door's front and the edge) before installing the new handle. Also, ensure whether the size of the latch on the new handle is a good match to this measurement.

You'll require a brand new lock cylinder if you're replacing the handle and latch or your existing one is damaged. If you're not changing locks, a new lock should fit in the recess you have already installed, and also work with your current keys. Be sure to select a latch with a rectangular cover plate that match your handles.

Then remove the Cover Plate

You can replace your old door handles with a modern rose and lever designs to make a difference in the appearance of your home. You can buy complete sets with matching escutcheons, privacy adaptors and escutcheons.

The first step in replacing the door handle inside is to remove the cover plate or rose, which conceals the screws and mechanism inside. Look for an release tab on the plate and use a flathead screwdriver to remove it from the knob. It could have an opening on one edge or be held in place by pins.

Remove the screw holding the handle inside and set it aside once the cover plate is removed. You'll also want to remove the screws that are holding the latch and the plates inside, which you can do by loosening them with a Philips screwdriver. Then, you can remove the outer plates and latch plate from the door and put them aside.

Not all doors have this gap. If yours does not have a handle, you'll need to drill a new hole into the door. This is the same process as opening a locked door however, you'll have to be extra careful not to harm the door or frame.

The installation of new door knob screws is necessary after holes have been drilled. Buy the same dimensions as your old screws to prevent getting a handle too tight or loose. You'll also have to install a new latch plate and strike rod that aren't included in most door handle sets.


Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great option if you're in need of a premium interior door handle replacement set. It's a factory-fit and has received a plethora of 5-star reviews from happy customers. It's a great choice to replace worn or damaged door hardware on your Chevy.